Configuring Flow Exports on Avaya WLAN 8100

For NetFlow analysis, you need to configure your devices to export flows to the Site24x7 On-Premise Poller, which is the NetFlow collector. The On-Premise Poller will be listening to the particular port to receive flows. Learn how to find the port number of your On-Premise Poller.

  1. Configure IP Flow Information Export (IPFIX) on Avaya WLAN 8100 using the following commands:
    ip ipfix enable
    ip ipfix slot 1 aging-interval 60 export-interval 60 exporter-enable template-refresh-interval 60 template-refresh-packets 10000
  2. Enter global configuration mode on the router or the Multilayer Switch Feature Card, and execute the following commands for each interface on which you want to enable flow:
    interface {INTERFACE_NAME}
    ip ipfix port

    For example

    Interface GigabitEthernet 0/1
    ip ipfix port 1
    interface GigabitEthernet 0/2
    ip ipfix port 2
    To enable flow export, it is necessary to configure the ip ipfix port <port_number> for each interface, specifying the respective port number associated with that interface.
Was this document helpful?
Thanks for taking the time to share your feedback. We’ll use your feedback to improve our online help resources.