Configuring Flow Exports on Allied Tele Switch
For NetFlow analysis, you need to configure your devices to export flows to Site24x7 On-Premise Poller, which is the NetFlow collector. The On-Premise Poller will be listening to the particular port to receive flows. Learn how to find the port number of your On-Premise Poller.
Configure flows (sFlow) on Allied Tele switches using the following commands:
sflow enable
sflow collector max-datagramsize 1200
sflow collector ip {NETFLOW_SERVER_IP}
sflow agent-ip {LOOPBACK_INTERFACE_NAME}
sflow collector max-datagramsize 1200
sflow collector ip {NETFLOW_SERVER_IP}
sflow agent-ip {LOOPBACK_INTERFACE_NAME}
Enter global configuration mode on the router or Multilayer Switch Feature Card (MSFC), and issue the following commands for each interface on which you want to enable flow:
interface port {PORT_RANGE}
sflow sampling-rate 1024
Sflow polling interval 60
sflow sampling-rate 1024
Sflow polling interval 60